410 Series Bearings T2-215 Trunnion Bearings
211 and 410 Series Bearings – Match or exceed that offered on most competitive discs. The 211 Series greaseable bearing feature ten 9/16” balls and has a radial load rating of 7520 lbs @ 33-1/3 RPM. For those applications requiring a medium to heavy-duty bearing, the 410 Series with a radial load raring of 14100 lbs. @ 33-1/3 RPM is an excellent choice. Seven 15/16” steel balls are contained within the 410 Series greaseable bearing. Both the 211 and 410 Series bearings seal shields are included for additional protection from abrasive soils. The 410WSS bearing is 5/16" wider allowing 2, triple lip seals that cannot be overgreased unlike the older 410N bearing.
T2-215 Trunnion Mounted Bearing – These Heavyweights are exclusively Ezee-On’s design and are featured in all of its largest and heaviest offset and tandem discs. Two 215 Series bearings are contained within the massive greaseable trunnion type housing. Each of the 215 bearings features eleven 11/16” steel balls. Two independent 3 ply National “syntech” seals protect the bearings. Specially designed for high load and low rotation speeds, the T2-215 has a radial load rating of 22800 lbs. @ 33-1/3 RPM. Pivot points keep the trunnions centered and able to handle shaft deflection. The housing design also makes it easy to drop individual gang assemblies – simply remove one bolt per hanger. Optional wear plates are available for additional protection in rocky conditions or whenever abrasive soil conditions might cause premature wear to the housing.
Floating Hitch
Exclusive Floating Hitch – Not available on most competitive discs, this exclusive Ezee-On feature is unique in that the hitch is designed to move or down with the tractor without inferring with the operation of the disc (see illustrations 1 and 2). When obstructions such as rocks or roots are encountered or when irregular ground conditions such as washouts exist, the disc simply rolls over or through them without transferring weight to the front gangs (see illustration 3). The chance of costly damage to both the disc blades and or gang bearings is significantly reduced. Also incorporated into the floating hitch is a spring-cushioned screw crank which makes short work of front-to-rear leveling of the disc. All model 4490, 4590, 4500 and 4600 discs feature the Floating Hitch as standard equipment.
Stone Flex Hangers Furrow Filler Blades Rigid Hanger Steel Fabricated Spools
Stone-flex Hangers – for those who want additional protection for Ezee-On’s already rugged bearings, blades, spools, and gang shaft, stone-flex hangers are available as an option. Discs, especially is rugged conditions, can encounter extreme and repetitive shock forces from ground embedded rocks or roots. The stone-flex hanger is a perfect choice for cushioning those shock loads and averting costly damage to expensive gang components. The C-shaped spring steel hanger is designed to absorb both vertical, and more importantly, horizontal forces without compromising disc penetration. All stone-flex hangers on Model 4490 and 4590 discs are 1¼” x 2” while the 4300, 4500 and 4600 Models feature a larger 1¼” x 2½” hanger. Scraper bars are mounted integrally to the stone-flex hangers allowing it to move with the gang whenever the hanger flexes.
Furrow Filler Blades – in order to get the most uniform and consistent working of the field, Ezee-On tandem discs feature tapered furrow filler blades as standard equipment. On the larger working widths two furrow filler blades per side are standard, one 4” less in diameter than the working blades and the second 8” less (Note: only one furrow filler blade is supplied per side on the Model 395, and Model 4300 discs under 19”). These finishing blades are integral to the rear gangs of the disc and work together with the full sized blades to create a level ridge-free field.
Standard Rigid Hanger – all rigid hangers on Ezee-On’s tandem discs are constructed of high tensile steel for strength and are contoured to the blade curvature for maximum trash flow. Each hanger U-Bolt mounted to the gang beam for ease of removal or adjustment. Unlike competitive brand discs that feature fixed-position bearing hangers welded to the gang beam, Ezee-On hangers can be repositioned should heavier blades be installed after years of use.
Steel Fabricated Spools – all Ezee-On tandem discs feature steel half and full spools as standard equipment. Unlike cast iron spools, steel spools can withstand greater “shock loads” from rocks or stumps thereby eliminating spool breakage. During its manufacturing process, each spool is squared, beveled and compressed to maximum density prior to assembly, to ensure the gang will not shift and loosen. Combine this rugged spool construction with the industry’s largest diameter gang shaft and the result is one massive gang unit capable of withstanding rigorous field work year after year.
Blade Scrapers Slip In Spindle Axles Pan Style Scrapers
Blade Scrapers – all Ezee-On tandem discs feature one piece, 4” wide blade scrapers made of carbon steel for long wear life. All scrapers are U-Bolt mounted to the scraper bar and can be adjusted individually or one at a time. All scraper bars are constructed of 2” x 2” tubular steel. The leading edge of each scraper is located near the center of the blade to reduce draft requirements and eliminate the need for trash guards.
Slip-in Spindle Axles – Ezee-On’s tandem discs are built with maintenance concerns in mind. All spindle axles are designed for easy removal and strength. Each spindle is bolted into a sleeve and can be removed by simply removing the bold and pulling out the axle. This saves valuable time if repairs to the tire or wheel components are required. This feature is Not Available on the Model 395 disc.
Optional Pan-Style (Moldboard) Scrapers are available on 4500 and 4600 model discs, which mount low on the disc blade to provide effective cleaning of the disc blade and prevent sticky soils from building up. As a result, the disc cuts cleaner and draft is lighter. All scrapers are adjustable individually or as a group for optimum performance in the field.
Blade Spacing Large Gang Shaft
Choice of Blade Spacing – Ezee-On tandem discs offer spacing choices that allow every field operation from secondary or finishing to primary tillage and breaking. Medium duty models such as the 395, 4490 and 4590 feature 8” or 9” blade spacing. Discs with 9” or 10½” spacing are considered general purpose, whereas 8” spacing is best for fine-seedbed work. 12” spacing is reserved for the heavy Model 4500 and 4600 discs when deep plowing is required.
Large Gang Shaft – all Ezee-On tandem discs feature a large 1-15/16” diameter, high carbon steel gang shaft. The large diameter gang shaft – 40% larger than that on competitive models – is important in preventing blade and bearing failure due to stretching or breaking. The gang shaft together with Ezee-On’s steel fabricated spools are pre-assembled and torqued at Factory to 3200ft/lbs making the whole gang almost one mass.

Three Year Limited Warranty
3 Year Warranty - At the sole discretion of Ezee-On Manufacturing, defective parts and/or workmanship will be repaired or replaced for the original, non-commercial owner. Coverage is: 1-12 months 100% Parts & Labor, 13-24 months 100% Ezee-On Manufactured Parts, 25-26 months 50% Ezee-On Manufactured Parts.

Seven Year Limited T2-215 Bearing Warranty
7 Year Warrenty - Extended coverage (12-84 months) on T2-215 bearing is limited to the replacement of ball bearings and seals for the original, non-commercial owner. Associated bearing parts, labour, freight, etc., are not covered.

Contact Ezee-On Dealer or Factory for complete warranty details, including exclusions to coverage.