6650
6650
6650
 

• 220 – 250 lbs/ blade weight class – handles the toughest soil conditions

• BEARINGS: 410 WSS Series, regreaseable, standard equipment (14,100 lbs load rating, each) T2-215 Series Trunnion Mounted Bearings, regreaseable, Optional (22,800 lbs load rating, each)

• FLOATING HITCH: allows the disc to follow ground contour with no front gauge wheels required for less plugging/ ridging and smooth level field finish

• 9” or 10.5” blade spacing – result is better trash flow

• BLADES: 24”x9/32” (610 x 7mm), 24”x5/16” (610 x 8mm), 26” x 5/16” (660 x 8mm), or 26” x 3/8” (660 x 9mm) notched or smooth.

• Wide range of sizes and configurations to suit residue & soil conditions

• 25’ – 35½’ (7.6 – 10.8m) widths available

• GANG ANGLE: 20° front and 17° rear offers the best combination for consistent ground penetration and smooth residue flow through the blades
 
Welded, 6”x4” (152 x 102 mm) Tubular Steel Frame w/6” x 4” (152 x 102 mm) gang beams
Staggered, overlapping front gangs on the Model 6650 disc ensures that all soil at the center of the disc is cut out cleanly and evenly. Besides leaving a more level soil profile, this feature eliminates the need for a center shank or bulk buster normally supplied on most conventional tandems.
Two large 5” x 36” (127 x 914mm) cylinders folds Model 6650 hydraulically to a transport width of 17-1/2’ (5.33m).
A rephrasing hydraulic lift system is standard equipment on the 6650 disc. Depth stop segments c/w holder (main frame lift cylinder only) are supplied with each disc to ensure continuous same-depth tilling. Each of the wing frames can be easily leveled using a conveniently located eye-bolt adjustment. Cylinder arms on each of the rockshafts are equipped with replaceable hardened wear bushings for prolonged trouble free performance.
 
Slip in spindle-axles: all spindle-axles are designed for easy removal and maximum strength. Each spindle is bolted into a sleeve and can be removed by simply removing the bolt and pulling out the spindle-axle.
Tandem walking beam axles are standard on the 6650 mainframe. Each walking beam pivots on 2 tapered roller bearings to improve weight distribution and stability, especially when in transport.
A heavy-duty main frame rockshaft forms the backbone of the 6650 lift system. Constructed of 5½” diameter heavy wall tubing, the rockshaft rotates freely in greaseable bearing saddles.
Forward-action wheel legs on the wings promote a level field finish by reducing ridging or gouging. This provides consistent penetration of discing depth in rough field conditions with no need for front gauge wheels.
 
Interlocking Bearing Spools
blank
blank
blank
Inter-Locking Bearing Spools - This exclusive Ezee-On feature ensures that each bearing sleeve interlocks with adjoining half spools to provide positive drive to blades and reduces possibility of blades turning on gang shaft. Optional for 24" or 26" blades, standard with 28" and 30" blades (available with 10.5" and 12" spacing only).
 
 
 
 
SPECIFICATIONS
 

FRAME: Welded, 6”x4” (152 x 102 mm) Tubular Steel Frame w/6” x 4” (152 x 102 mm) gang beams

GANG BEAMS: Constructed of 6" x 4" x .375 wall tubing.

FLOATING HITCH: allows the disc to follow the ground contour for smooth level field finish. (Ezee-On Exclusive)

GANG ANGLE: 20° front and 17° rear offers the best combination for consistent ground penetration and smooth trash flow.

FABRICATED STEEL SPOOLS: withstand far greater ‘shock loads’ from rocks or stumps, thereby eliminating spool breakage. Compressed to maximum density prior to assembly, Ezee-On’s fabricated spools ensure the gang will not shift and become loose.

BLADES: 22” x 9/32” (559 x 7mm), 24” x 5/16” (610 x 8mm), 26” x 5/16” (660 x 8mm), 26” x 3/8” (660 x 9mm) notched or smooth.

FRONT GANGS: Staggered and overlapping eliminates need for center shank or bulk buster.

BEARINGS: T2-215 Series Trunnion Mounted Bearings.

RIGID HANGERS: withstand far greater ‘shock loads’ from rocks or stumps, thereby eliminating spool breakage. Compressed to maximum density prior to assembly, Ezee-On’s fabricated spools ensure the gang will not shift and become loose.

STONE-FLEX HANGERS: Optional, C-Style 1¼” x 2½” formed spring steel.

SCRAPERS: 4” (102mm) wide formed carbon steel, U-Bolt mounted scraper bar for maximum adjustment. Optional heavy duty scrapers are available for rugged conditions.

FURROW FILLER BLADES: Integral to rear gangs, four are supplied standard with each disc.

TANDEM WALKING BEAM AXLES: are standard on the 6650 mainframe. Each walking beam pivots on 2 tapered roller bearings to improve weight distribution and stability, especially when in transport.

SLIP-IN SPINDLES: all spindle-axles are designed for easy removal and maximum strength. Each spindle is bolted into a sleeve and can be removed by simply removing the bolt and pulling out the spindle-axle.

HUBS: Heavy-duty 8 bolt hubs (4) are standard on 6650 main frame wheels, 6 bolt hubs (4) supplied standard on wing frame wheels.

TIRES: Four 11L x 15 FI L/R “F” tires are supplied standard on the 6650 main frame, four 11L x 15 FI L/R “D” tires are supplied standard on each wing frame.

 
Specifications, including warranties, contained in this website apply to products manufactured for sale in North America and may not be available for, or applicable to, products sold outside this geographical area.