minfo
Frame Front Gangs Hydraulic Fold Hydraulic Lift System
The 4500 features heavy-duty frame construction. Both main and wing frames are all-welded, entirely of 6” x 4” x .375 wall tubing. To carry the massive outer gangs, each outrigger on the wing frames is additionally strengthened over the wheels to an unbelievable 10 inches.
Staggered, overlapping front gangs on the Model 4500 disc ensures that all soil at the center of the disc is cut out cleanly and evenly. Besides leaving a more level soil profile, this feature eliminates the need for a center shank or bulk buster normally supplied on most conventional tandems.
All 4500's fold hydraulically to a narrow transport width of only 12’ (3m) which provides a safer transportation from point A to point B. Two 5” x 36” cylinders fold or unfold the two wings. Hydraulic lockout valves are supplied standard to prevent accidental operation of either the lift or wing cylinders when the disc is being transported.
A rephrasing hydraulic lift system is standard equipment on the 4500 disc. Depth stop segments c/w holder (main frame lift cylinder only) are supplied with each disc to ensure continuous same-depth tilling. Each of the wing frames can be easily leveled using a conveniently located eye-bolt adjustment. Cylinder arms on each of the rockshafts are equipped with replaceable hardened wear bushings for prolonged trouble free performance.
Walking Beam Axles
Main Frame Rockshaft
 Inter-Locking Bearing Spools
Walking Beam Axles
Tandem Walking beam axles and 11L x 15 L/R "F" tires are standard on the 4500 mainframe. Each walking beam pivots on two tapered roller bearings to improve weight distribution and stability when the disc is being transported.
A heavy-duty main frame rockshaft forms the backbone of the 4500 lift system. Constructed of 6-5/8” diameter heavy wall tubing, the rockshaft rotates freely in three greaseable graphite-plastic bearing saddles designed to eliminate metal to metal wear points.
Inter-Locking Bearing Spools - This exclusive Ezee-On feature ensures that each bearing sleeve interlocks with adjoining half spools to provide positive drive to blades and reduces possibility of blades turning on gang shaft. Optional for 24" or 26" blades, standard with 28" and 30" blades (available with 10.5" and 12" spacing only).

FRAME: All welded 6” x 4” x .375 wall tubing.

GANG BEAMS: Integral to main and wing frames.

HITCH: Free floating, automatic self-leveling and spring loaded. Adjustable for fore/aft leveling of the disc.

GANG ANGLE: Fixed, 21 degrees front and 19 degrees rear.

SPOOLS: 6” diameter, steel fabricated, squared and beveled.

BLADES: 24”, 26”, 28” or 30" diameter, notched or plain.

BEARINGS: 410 SS Bearings are standard equipment on the 4500, and T2-215 bearings are optional.

RIGID HANGERS: Massive 1¼" x 5 welded steel construction. Slim line design and contoured to maximize trash clearance. Hangers are U-Bolt mounted to gang beam for ease of adjustment or removal.

STONE-FLEX HANGERS: Optional, C-Style 1¼” x 2½” formed spring steel.

SCRAPERS: 4” wide formed carbon steel, U-Bolt mounted scraper bar for maximum adjustment. Optional heavy duty scrapers are available for rugged conditions.

FURROW FILLER BLADES: Integral to rear gangs, four are supplied standard with each disc.

WALKING BEAM AXLES: Standard on 4500 main frame.

SLIP-IN SPINDLES: Standard on all wheels.

HUBS: Heavy-duty 8 bolt hubs (4) are standard on 4500 main frame wheels, 6 bolt hubs supplied standard on wing frame wheels.

TIRES: Four 11L x 15 Load Range "F" tires are supplied on the 4500 main frame, two 11L x 15 L/R "D" tires are supplied standard on each wing frame.

Specifications, including warranties, contained in this website apply to products manufactured for sale in North America and may not be available for, or applicable to, products sold outside this geographical area.