minfo
Metering Roller
Transmission Drive
Range Sprockets
Stone Trap
3000 and 4000 Series Air Carts feature polyurethane, fluted metering rollers. Not only is changing rollers unnecessary when switching from one product to another, but this design also ensures a constant flow of product.
(Limited Lifetime Warranty)
Metering transmissions are powered off the left rear wheel, therefore application rates remain constant even when increasing or decreasing ground speed. The Air Cart’s implement width can be set by installing 2 applicable sprockets on this transmission.
Each metering roller is equipped with a Range Sprocket Cluster that eliminates the need to change metering rollers when switching from one product to another. This adjustment is completed in a few seconds and no tools are required.
Each metering housing has a built-in stone trap design to collect foreign material such as small pebbles, fertilizer lumps etc. that have passed through the tank screen. This feature eliminates possible jamming of the metering system or premature roller wear.
Distribution System Pressurized Lid Seal Double / Single Shoot
Ezee-On offers single and double shoot capability as standard equipment. Simply moving two levers per primary run changes the Air Cart from single to double shoot. Adjusting the air plenum in front of the fan completes the process.
Accurate product application is dependant on maintaining constant pressurization within the tank. This unique seal utilizes air pressure from inside the tank to provide a consistent seal against the lid.
While double shooting (see above) product from the rear tank travels through the bottom set of hoses and product from the front tank(s) travels through the top set of hoses. To single shoot, simply flip 2 levers per primary run and product from the rear tank is directed to the top set of hoses and mixes with product from the front tank(s).
Tank Openings Automatic Work Switch Total Tank Cleanout Roller Inspection
Large 22”x26” (559x600mm) tank openings provide operators with faster filling times. The adjustable over-center lid locks maintain positive air pressure within each compartment. Tank screens are standard to keep out unwanted debris.
Offered as standard equipment with all Ezee-On Air Carts, this industrial switch will engage and disengage the main drive clutch automatically when raising or lowering the seeding implement. A manual position is also provided to allow the operator control over this clutch.
Removing product from any tank compartment is as simple as positioning auger under the tank and then opening the total tank cleanout door. Simple and easy.
Ezee-On has designed the metering roller system so operators can conveniently inspect the roller when tanks are either empty or full.
Load / Unload Auger Bottom / Top Controls Auger Lock Auger Swing
An 8” (203mm) diameter load/unload auger is standard on both the 3000 and 4000 Series Air Carts. A larger 10” (254mm) diameter auger is optional for the 4000 Series. Balanced for a one-man operation, the 8” auger will fill 315 bushels in 7 minutes.
All 3000 and 4000 Air Carts feature both top and bottom auger controls as standard equipment. Spring-loaded controls automatically return to neutral position when not engaged and provides the operator with full Forward/Neutral/Reverse functions.
Augers on 3000 and 4000 Series Air Carts feature an adjustable locking mechanism. This secures the auger to the Air Cart for transport. The additional safety strap is provided to secure the auger should the transport lock accidentally unlatch.
This lock prevents the auger from moving once it is placed into 1 of 3 positions. This feature is helpful when filling on sidehills or on days that are exceptionally windy.
Flash Monitor In-Cab Rate Control Clutch Control Blockage Monitor
Viewing all the Air Cart functions from in the cab is critical to ensure trouble free seeding. Digital application rates, fan RPM, area per hr/field/season and ground speed can all be viewed by the operator while seeding. Bar graphs for each bin level are controlled by 4 bin level sensors, standard, to allow operators the ability to plan ahead for fills.
Ezee-On’s In-Cab Rate Control Monitor allows the operator to adjust the metering rates on-the-go from the tractor cab. An Electric Actuator located on each variable speed transmission increases or decreases application rate.
All models feature heavy-duty Warner 12volt electro-magnetic clutches as standard equipment on both the main drive and each individual tank . The main drive clutch can be either manually controlled by the operator, or in placed Auto mode.
This option provides an operator with the ability to monitor the flow of product from the cab and will create an alarm if a hose should become plugged. Ezee-On’s Optical Blockage Sensors do not rely on contact as competitive pinstyle sensors do, which can result in plugging.
Safety / Work Lights Quad Axle Rear Tow Hitch Engine Drive Fan
Safety and Work lights are available for all 3000 and 4000 Series Air Carts. Work lights provide additional illumination while seeding into the night.
Designed primarily for controlled traffic farming this 3m Quad Axle is available for all 3000 and 4000 Series Air Carts. This Bolster style axle is designed to oscillate 10 degrees up and down.
Both 3000 and 4000 Series Air Carts can be equipped with an optional Rear Tow Hitch. This clevis style hitch is designed for towing liquid fertilizer wagons or NH3 tanks.
Available on 3000 Series Air Carts, this option allows for air seeding with tractors that have limited hydraulic capacity. The gasoline powered 27HP Kohler engine provides sufficient air volume and pressure to double shoot up to 40’ (12.2m).
Specifications, including warranties, contained in this website apply to products manufactured for sale in North America and may not be available for, or applicable to, products sold outside this geographical area.